cGuard Zenit
cGuard Zenit is a vehicle GPS tracker, which is ideal for monitoring the location of remote objects. This device is easy for configuring with the help of a convenient web configurator. cGuard Zenit is equipped with a SIM holder, which allows to install a SIM card. With the help of internal 4 MB memory device is able to keep tracking points.
Server Integration
| Server IP | 116.203.105.226 | |
| Port | 6123 | |
| Protocol | adm |
General information
| Purpose | Vehicle | |
| Installation | Professional |
Housing
| Weight | 55 g (1.94 oz.) | |
| Size | 70x50x20 mm (2.76x1.97x0.79 in) |
GNSS Location
| Internal antenna (GNSS) | Yes | |
| GPS | Yes | |
| GLONASS | Yes |
Connectivity
| Cellular network type | GSM Quad Band | |
| Internal antenna (Connection) | Yes | |
| Cellular network generation | 2G |
Interfaces
| 1-Wire interface | Yes | |
| RS232 interface | Yes | |
| Number of RS232 interfaces | 1 | |
| RS485 interface | Yes | |
| Number of outputs | 2 | |
| Number of inputs (all types) | 4 | |
| Discrete inputs | Yes | Supported |
| Analog inputs | Yes | Supported |
| Impulse inputs | Yes | Supported |
| Frequency inputs | Yes | Supported |
Hardware extras
| Fuel level sensor reading | Yes | Supported |
| Driver ID reading | Yes | Supported |
| External temperature sensor reading | Yes |
Tracking features
| Tracking modes | Continuous | |
| Location by Cell ID | Yes | Supported |
Events monitoring
| Battery low | Yes | Supported |
| External power cut off | Yes | Supported |
Self monitoring
| Network signal level | Yes | Supported |
| GNSS signal level | Yes | Supported |
| External power source voltage | Yes | Supported |
| Internal battery level | Yes | Supported |
Remote management
| Server connection setup over SMS | Yes | Supported |
| Remote device configuration | Yes (over GPRS) | Supported |
| Remote outputs control | Yes (over GPRS) | Supported |
More From cGuard
Can't find your device?
We can add it
We can add it
© TeraTrack. All Rights Reserved