cGuard 285
cGuard 285 is GPS/GLONASS tracker designed especially for trucks, vans and public or private transport buses. This device has a high level of functionality.
Server Integration
| Server IP | 116.203.105.226 | |
| Port | 6123 | |
| Protocol | adm |
General information
| Purpose | Vehicle | |
| Installation | Professional |
Housing
| Weight | 200 g (7.05 oz.) | |
| Size | 100x22x74.5 mm (3.94x0.87x2.93 in) |
GNSS Location
| Internal antenna (GNSS) | ||
| External antenna (GNSS) | Yes |
Connectivity
| Cellular network type | GSM 900/1800 | |
| Internal antenna (Connection) | ||
| External antenna (Connection) | Yes | |
| Cellular network generation | 2G |
Interfaces
| 1-Wire interface | Yes | |
| RS232 interface | Yes | |
| Number of RS232 interfaces | 1 | |
| RS485 interface | Yes | |
| Number of outputs | 4 | |
| Number of inputs (all types) | 8 | |
| Discrete inputs | Yes | Supported |
| Analog inputs | Yes | Supported |
| Impulse inputs | Yes | Supported |
| Frequency inputs | Yes | Supported |
| Outputs | Yes | Supported |
Hardware features
| Battery capacity | 900 mAh | |
| Built-in battery | Yes |
Hardware extras
| Fuel level sensor reading | Yes | Supported |
| Driver ID reading | Yes | Supported |
| External temperature sensor reading | Yes | Supported |
Events monitoring
| Battery low | Yes | Supported |
| Input change | Yes | On Request |
| External power cut off | Yes | Supported |
Self monitoring
| Network signal level | Yes | Supported |
| GNSS signal level | Yes | Supported |
| GNSS satellites fixed | Yes | Supported |
| External power source voltage | Yes | Supported |
Remote management
| Server connection setup over SMS | Yes | Supported |
| Remote device configuration | Yes (over GPRS) |
More From cGuard
Can't find your device?
We can add it
We can add it
© TeraTrack. All Rights Reserved