Granit-Navigator 4.14
Granit-Navigator 4.14 is a high-tech and compact device for tracking a vehicle, monitoring its movement and connecting the necessary equipment. Granit-Navigator 4.14 will allow remote monitoring of the vehicle's location using satellite navigation. The tracker is equipped with a highly sensitive GLONASS/GPS receiver, which is constantly in communication even in case of weak signal. The tracker is most suitable for freight and passenger transportation, the compact size of the device allows to use Granit-Navigator 4.14 even on motorcycles.
Server Integration
| Server IP | 116.203.105.226 | |
| Port | 6113 | |
| Protocol | adm |
General information
| Purpose | Vehicle | |
| Installation | Professional |
Housing
| Size | 105x55x12 mm (4.13x2.17x0.47 in) |
GNSS Location
| Internal antenna (GNSS) | Yes | |
| GPS | Yes | |
| GLONASS | Yes | |
| Galileo | Yes |
Connectivity
| Cellular network type | GSM/UMTS | |
| Cellular network generation | 2G, 3G |
Interfaces
| RS232 interface | Yes | |
| Number of RS232 interfaces | 3 | |
| RS485 interface | Yes | |
| Number of outputs | 4 | |
| ACC/Ignition input | Yes | Supported |
| Discrete inputs | Yes | Supported |
| Analog inputs | Yes | Supported |
| Impulse inputs | Yes | Supported |
| Frequency inputs | Yes | Supported |
Hardware extras
| Fuel level sensor reading | Yes | Supported |
| External temperature sensor reading | Yes |
Tracking features
| Tracking modes | Continuous, Interval |
Self monitoring
| Network signal level | Yes | Supported |
| Internal battery level | Yes | Supported |
CAN/OBDII reading
| CAN/OBDII reader type | External | Supported |
Remote management
| Server connection setup over SMS | Yes | Supported |
| Remote device configuration | Yes (over SMS) | Supported |
| Forced LBS location update over GPRS | Yes | On Request |
| Forced GNSS location update over SMS | Yes | On Request |
More From Granit
Can't find your device?
We can add it
We can add it
© TeraTrack. All Rights Reserved