CalAmp LMU-5530
CalAmp LMU-5530 boasts an adaptable platform featuring: 3G/4G broadband routing, cellular gateway functions, a Programmable Event Generation engine, built-in 3-axis g-force measurements, multiple power management sleep modes, leading GPS sensitivity tracking technologies, and multiple interfaces all brought together under a flexible Linux operating system.
Server Integration
| Server IP | 116.203.105.226 | |
| Port | 6082 | |
| Protocol | adm |
General information
| Purpose | Router | |
| Installation | Professional |
Housing
| Weight | 227 g (8.01 oz.) | |
| Size | 146x102x40 mm (5.75x4.02x1.57 in) |
GNSS Location
| Internal antenna (GNSS) | Yes | |
| External antenna (GNSS) | Yes | |
| GPS | Yes | |
| GLONASS | Yes | |
| Assisted GPS | Yes |
Connectivity
| Cellular network type | HPSA/UMTS 850/900/1900/2100 | |
| Internal antenna (Connection) | Yes | |
| External antenna (Connection) | Yes | |
| Cellular network generation | 3G, 4G |
Interfaces
| 1-Wire interface | Yes | Supported |
| RS232 interface | Yes | Supported |
| Number of RS232 interfaces | 1 | |
| RS485 interface | Yes | Supported |
| Number of outputs | 7 | |
| Number of inputs (all types) | 12 | |
| ACC/Ignition input | Yes | Supported |
| Discrete inputs | Yes | Supported |
| Analog inputs | Yes | Supported |
| Outputs | Yes | Supported |
Hardware features
| Battery capacity | 1000 mAh | |
| Built-in battery | Yes | Supported |
Tracking features
| Tracking modes | Continuous | |
| Location by Cell ID | Yes | Supported |
Self monitoring
| Network signal level | Yes | Supported |
| Network operator ID | Yes | Supported |
| GNSS signal level | Yes | Supported |
| External power source voltage | Yes | Supported |
Remote management
| Server connection setup over SMS | Yes | Supported |
| Remote device configuration | Yes (over GPRS) | Supported |
| Remote outputs control | Yes (over GPRS) | Supported |
| Forced GNSS location update over SMS | Yes | Supported |
© TeraTrack. All Rights Reserved